Pinepanels High Density MDF is compliant Phase II emission limits of the California Air Resources Board Regulation 93120.2 as certified by approved third party certifier. The CARB compliant MDF is also compliant US EPA Regulation No: RIN:2070-AJ44, CFR:40 CFR Part 770. The EPA-CARB compliant MDF panels are imported under chain of custody procedure and every single MDF panel traded is traceable to its manufacturing facility.
Pinepanels High Density MDF is a specialty, application driven High Density MDF, engineered to meet the challenges in design and performance. Its constituent wood fiber is Pine grown in the native plantations in New Zealand and Brazil. The wood used in the manufacture is free from pollution by previous use or presence of foreign substances that saves on cost of tools and helps smooth production flow at ends user’s factories.
Constituent Pine being softwood yields light weight fibers, more or less uniform in its density which ensures a significantly higher compression of fiber and resin in the same density of MDF Panel made from hardwood like Rubber wood or Eucalyptus or Re-cycled wood fibers. Usage of low formaldehyde emission UF or MUF resin makes it an environment friendly and safe MDF product for your home and office.
Pinepanels MDF Panels are brightest in the market in color and appearance. This ensures fewer colors application to achieve desired finish.
It is unrivalled in its quality and performance Pinepanels High Density MDF is the hallmark of consumer’s confidence in the MDF market to-day.
While Pinepanels High Density MDF has literally innumerable interior applications in the cabinet-making, shop fitting, furniture and building industries, Hand crafted souvenirs etc, its excellent machining and finishing attributes combined with good working properties and its availability in a wide range of sheet thicknesses and sizes makes it a first choice MDF panel.
It must not be exposed to wet or high humidity conditions!
Value added variants such as Exterior and High Performance High Density MDF is being extended into powder coating application, shop fitting and display, interior fitments as well as components within numerous other MDF products. The term ‘High Performance MDF’ refers to High Density MDF specially engineered to withstand specific application requirements of the MDF panel.
High performance and Seamless finish
Light colour, durable and hard sanded surface
Routable, machinable
Low formaldehyde emissions, meets or exceeds the European E1 and
Compliant US EPA Regulation RIN:2070-AJ44, CFR:40 CFR Part 770
Compliant California ARB regulation No 93120.2 on Phase 2,
Fresh indoor air quality, free from toxic VOCs
Resistance to temperature variation: through a range of-40°C
to +50°C (-40°F to +122°F), comes in a variety of thicknesses and sizes
Products that improve your cost, material and energy efficiency
Reliable and timely deliveries
Local knowledge, support and service
Solutions for every application
Proven and documented technical data and environmental statements
Sanded surfaces,
Dimensionally stable, accurate & stable.
Strong and light
CNC Routable and can be machined,
Meets EUTR standards upon request,
Meets European E1 formaldehyde emission requirements
(EN 622-1:2003) and also California ARB regulation P2
100% natural plantation grown wood fibers from Soft wood.
UF and/or MUF low emitting resin.
Wood Fibers is a living material and is subject to moisture movement according to surrounding conditions, which affects the flatness and thickness swell of panels. .It is important to condition the panels to reach a moisture content near to the equilibrium of their permanent environment. The recommended stocking conditions are 20°C and a RH of air of about 60%.
The recommended stocking conditions are 20°C and a RH of air of about 60%.